	有限会社テクノ・ロジック Techno Logic, Inc. 沖縄市海邦２－９－２６ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ� 〒904-2162 ﾂ�Phone: 098-923-3413 ﾂ� F A X:ﾂ� 098-923-3414
	お問い合わせEmailアドレスﾂ�info@t-logic.jp

ﾂ� SEGGER社製

J-Link ARM Pro is a refined version of the regular J-Link. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators. It connects via Ethernet or USB to the Windows (2000/XP/Vista) PC host. J-Link ARM Pro is fully compatible with J-Link ARM and can be used "out-of-the-box". J-Link ARM Pro uses DHCP per default. The built-in webserver makes manual configuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development or production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.

Features:

	Fully compatible to J-Link ARM
	Ethernet interface
	USB 2.0 interface
	Any ARM^ﾂｮ7/9/11, Cortex邃｢-M3 core supported, including thumb mode
	More memory for future firmware extensions (ARM11, X-Scale, Cortex R4, Cortex A8)
	Additional LEDs for power and RESET indication
	Comes with web interface for easy TCP/IP configuration (built-in webserver)
	Built-in GDB Server (planned to be implemented in the near future)
	Serial Wire Debug (SWD) supported
	Serial Wire Viewer (SWV) supported
	y
	Maximum JTAG speed 12 MHz
	Download speed up to 720 Kbytes/second * (higher download speeds will be available in the near future)
	DCC speed up to 800 Kbytes/second *
	Seamless integration into the IAR Embedded Workbench^ﾂｮ IDE
	Powered through USB or power supply which comes with J-Link ARM Pro
	Support for adaptive clocking
	All JTAG signals can be monitored, target voltage can be measured
	Support for multiple devices
	Fully plug and play compatible
	Standard 20-pin JTAG connector
	Wide target voltage range: 1.2V - 3.3V, 5V tolerant
	USB and 20-pin ribbon cable included
	Memory viewer (J-Mem) included
	Comes with licenses for: J-Link ARM RDI, J-Link ARM FlashBP, J-Link ARM FlashDL, J-Link ARM GDB Server, J-Flash ARM
	Software Developer Kit (SDK) available
	Embedded Trace Buffer (ETB) support
	Adapter for 5V JTAG targets available
	14-pin JTAG adapter available
	Galvanic isolation from host system via Ethernet
	Optical isolation adapter available
	Target power supply: J-Link can supply up to 300 mA to target with overload protection.

* = Measured with J-Link ARM Pro Rev. 1, ARM7 @ 50 MHz, 12MHz JTAG speed.

Radmin.v3.4.keymaker.and.patch.only.fixed-embra... Direct

If you're looking for remote access solutions, consider exploring official software vendors, such as Remote Administrator (Radmin), TeamViewer, or LogMeIn. These companies offer legitimate and secure remote access solutions with robust features and support.

Radmin is a popular remote access software used for IT support, network administration, and other purposes. Version 3.4 is an older version of the software, and users may be looking for alternative solutions or cracks to access the software. Radmin.v3.4.Keymaker.and.Patch.Only.FIXED-EMBRA...

It seems like you're looking for information on Radmin v3.4 and potentially related tools like Keymakers and Patches. Radmin is a remote access software that allows users to manage and control computers remotely. If you're looking for remote access solutions, consider

Radmin v3.4 Keymaker and Patch Information consider exploring official software vendors

ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ� ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ�ﾂ� オンラインショップﾂ�ﾂ� "MEDIC ReCell 再生美容液ﾂ� CO2削減省エネ対応ﾂ� E･COOL CCFL（冷陰極管蛍光ランプ）蛍光管照明 ZENシリーズ" "ブラジル産プロポリス液" 災害時用・非常用トイレﾂ� ほっ！トイレﾂ� ホワイトレットﾂ� パウダレットﾂ� 【Zylin ZY1000 ARM7, ARM9, ARM11, XScale, Cortex JTAG Debugger】『ＳＥＧＧＥＲ J-Link ARM/J-Flash ARM』ﾂ�ﾂ� 『RONETIXﾂ� PEEDIﾂ� BDM/JTAG Emulator』ﾂ� 是非ご訪問下さいませﾂ�

Features:

Radmin.v3.4.keymaker.and.patch.only.fixed-embra... Direct

この Web サイトに関するお問い合わせやご意見などについては、info@t-logic.jp まで電子メールでお送りください。 ﾂｩ2003-2015 Techno Logic, Inc.

この Web サイトに関するお問い合わせやご意見などについては、info@t-logic.jp まで電子メールでお送りください。
ﾂｩ2003-2015 Techno Logic, Inc.